Fila

Fila Matt protective wax with natural effect Lt. 1 Fila

€19.50
Costi di spedizione:

IDEAL FOR:

- Cotto

- Klinker

- Unpolished agglomerates

- Tuff

- Resin

Quantity
  Articolo disponibile

Fila Matt protective wax with natural effect Lt. 1 Fila

IDEAL FOR:

- Cotto

- Klinker

- Unpolished agglomerates

- Tuff

- Resin

WHAT IT'S FOR:

- For the maintenance and matt finishing of terracotta, Klinker, antiqued marble, natural stone floor treatments;

- It is the ideal finish after water-based waterproofing;

- Ideal on internal brick and natural stone walls to prevent surface dusting;

- Prevents dusting on interior walls made of brick, natural stone and decorative coatings in plaster, reconstructed stone and concrete.

ADVANTAGES:

- Gives a natural effect;

- It has a high concentration: it can be used at various dilutions depending on the need;

- Polished, it allows to obtain a satin effect;

- It is completely removable;

- It has an excellent self-leveling power;

- It repels dirt and dust.

HOW TO USE

For the protection of floors and walls: Lightly dilute FILA MATT to make it more fluid and make it easier to apply by adding a glass of water per liter of product. On a clean and dry surface, apply a uniform coat of FILA MATT with a fleece or cloth (brush for walls).

Wait until completely dry (about an hour) and then pass a second coat crosswise to the first. Once dry (about an hour) the floor can be walked on. If you want a slightly higher gloss you can go with a woolen cloth or lucidatrice.Su cooked and highly absorbent stones (eg. Sandstone, quartzite rough) we suggest to apply a waterproofing hand as FILA FOB or FILA W68 .
For maintenance: Renewal of the finish (every 2-3 months): after cleaning the surface with a diluted solution of FILA CLEANER (1: 200), apply FILA MATT diluting 500 ml. of product in 5 liters of water. Once dry, the floor can be walked on. Restoring the protection (once a year): apply the slightly diluted wax (one 200 ml. Of water per liter of product) with a fleece, rag or other applicator. Once dry, the floor can be walked on. For the Anti-dusting treatment: on a dry surface, apply an even coat of pure FILA MATT product with a brush. After about an hour the treated surface is dry.

CAUTION

It is possible to remove the product using the specific wax remover for water-based waxes FILA PS87 . It is not recommended to use the product on external surfaces, in humid environments and where there is stagnation of water (bathrooms, showers). The product can change the aesthetic appearance of the material, check in advance on a small portion of the surface.

SURRENDER

With a liter of product I do:
  • Terracotta 30 m2
  • Stone 30/40 m2

FORMATS

5-liter canisters: 4-piece cartons

1 liter cans: 12 pieces cartons

FIL54000012
23 Items