

KPM 50 Speroni volumetric electric pumps
Volumetric electric pumps capable of developing high heads with limited powers, and having particularly stable operating curves.
They are suitable for domestic systems, to increase the network pressure of the aqueducts and for the automatic distribution of water by means of small tanks, autoclaves or membrane hydrosphere groups.
For the correct operation of the pump, use only clean water or non-aggressive liquids, without the presence of sand or other solid impurities.

KPM 50 Speroni volumetric electric pumps
Volumetric electric pumps capable of developing high heads with limited powers, and having particularly stable operating curves. They are suitable for domestic systems, to increase the network pressure of the aqueducts and for the automatic distribution of water by means of small tanks, autoclaves or membrane hydrosphere groups. For the correct operation of the pump, use only clean water or non-aggressive liquids, without the presence of sand or other solid impurities.
LIMITS OF USE
- Liquid temperature up to 35 ° C (for domestic use according to EN 60335-2-41)
- Liquid temperature up to 60 ° C (for other uses)
- Ambient temperature up to 40 ° C
- Manometric suction height up to 7 meters.
- Continuous service
MATERIALS
- Pump body: Cast iron
- Motor support: Cast iron
- Impeller: Brass
- Motor shaft: AISI 304 stainless steel
- Mechanical seal: Ceramic / Graphite / NBR
- Mechanical seal (KPM70): Graphite / Silicon / NBR